Product Overview
The TPS20 Series Non-indicating Pressure Transmitter offers excellent corrosion resistance with its stainless steel housing and high accuracy of 0.3% F.S. It provides various connection methods, including head type, DIN connector type, and connector cable type, along with user-friendly functions like built-in zero-point and span adjustment for the head type. This transmitter is suitable for measuring liquid, gas, and oil, excluding corrosive environments for the stainless steel type 316. It operates with a 15-35VDC power supply and outputs a DC4-20mA current signal.
Product Attributes
- Brand: G-67 TPS20 Series
- Material: Stainless steel housing (type 316 for sealing, diaphragm, connection), fluoro rubber O-ring
- Corrosion Resistance: Excellent
- Accuracy: 0.3% F.S.
- Connection Methods: Head type, DIN connector type, Connector cable type
- User Functions: Built-in zero-point, span adjustment (head type)
- Protection Circuit: Reverse polarity protection
- Case Structure: Drip-proof structure
- Measured Materials: Liquid, gas, oil (except corrosive environment of stainless steel type 316)
- Environmental Conditions: Ambient temp. -10 to 70, storage: -10 to 70; Ambient humi. 5 to 95% RH, storage: 5 to 95% RH; Altitude max. 2,000 m; Pollution Degree 2; Installation Category II
Technical Specifications
| Specification | Details |
|---|---|
| Model Series | TPS20 |
| Pressure Type | Gauge pressure, Absolute pressure, Compound pressure |
| Rated Pressure Range | 0 to 0.2 to 350kgf/cm; 0 to 1.0 to 35kgf/cm; -760mmHg to 0 to 35kgf/cm |
| Max. Pressure Range | 300% of max. span |
| Power Supply | 15-35VDC |
| Permissible Voltage Range | 90 to 110% of rated voltage |
| Current Consumption | Max. 50mA |
| Response Time | Max. 100ms |
| Current Output | DC4-20mA |
| Linearity | 0.3 F.S. (-10 to 50), 0.5F.S. (50 to 70) |
| Hysteresis | 0.3% F.S. |
| Temp. Zero Shift | 0.03% F.S. |
| Temp. Span Shift | 0.03% F.S. (at 25) |
| Load Resistance | Max. 600 |
| Insulation Resistance | Over 100M (at 500VDC megger) |
| Dielectric Strength | 500VAC 50/60Hz for 1 minute |
| Vibration | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours |
| Shock | 95m/s |
| Tightening Torque | Industrial plug over 5N |
| Pressure Port | G3/8" (standard), R3/8, R1/2 |
| Weight (approx.) | 350g (approx. 320g for unit only, based on head type) |
| Cable Ordering (sold separately) | CID3-2, CID3-5, CLD3-2, CLD3-5 |
Dimensions (unit: mm)
Head type: M12, 14.8, L(m), 5, 40, 27.5, 32, 84, 24, 21, 31, 28, 42, 104, G3/8, 8, 46.5, 27, 21, 31, 62, 10
DIN connector type: M12, 14.8, L(m), 5, 27.5, 32, 84, 24, 21, 31, 28, 42, 104, G3/8, 8, 46.5, 27, 21, 31, 62, 10
Connector cable type: M12, 14.8, L(m), 5, 27.5, 32, 84, 24, 21, 31, 28, 42, 104, G3/8, 8, 46.5, 27, 21, 31, 62, 10
Connection Cable (Sold Separately)
| Model | L (m) | Material |
|---|---|---|
| CID3-2 | 2 | PVC |
| CID3-5 | 5 | PVC |
| CLD3-2 | 2 | PVC |
| CLD3-5 | 5 | PVC |
Main Circuit / Connections
Power Supply: 15-35VDC (brown)
Output: DC4-20mA
2-wire connection: +V (blue) to terminal 1 (+), GND to terminal 2 (-)
Load Resistance: Max. 600
External Connections
| Type | Pin | Function |
|---|---|---|
| Head type | 1 | + |
| 2 | - | |
| 3 | N.C. | |
| 4 | F.G. | |
| DIN connector type | 1 | + |
| 2 | - | |
| 3 | N.C. | |
| Connector cable type | 1 | + |
| 2 | - | |
| 3 | N.C. |
2411220112_Autonics-TPS20-G2AF8-00_C6886464.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
