Product Overview
The BWP Series Flat Area Sensors offer a compact and efficient solution for detecting opaque objects. Featuring a slim 13mm body with a Fresnel lens and a durable plastic injection case, these sensors are designed for easy recognition from various angles and long distances due to their high-brightness LED. With a fast response time of up to 7ms and selectable operation modes, they are suitable for applications requiring reliable detection and interference prevention. The series provides multiple models with varying optical axis pitches and sensing heights to accommodate diverse requirements.
Product Attributes
- Brand: D-51 SENSORS CONTROLLERS MOTION DEVICES SOFTWARE (Implied from context)
- Protection Structure: IP40 (IEC standard)
- Case Material: Polycarbonate/Acrylonitrile butadiene styrene
- Sensing Part Material: Polymethyl methacrylate
- Cable: 3.5mm, 4-wire, 3m (AWG 24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: 1mm)
- Approvals: (Not specified)
Technical Specifications
| Model | Sensing Type | Sensing Distance | Optical Axis Pitch | Number of Optical Axis | Sensing Height | Response Time | Power Supply | Current Consumption (Emitter/Receiver) | Light Source | Operation Mode | Control Output | Protection Circuit | Insulation Resistance | Synchronization Type | Interference Protection | Noise Immunity | Dielectric Strength | Vibration | Shock | Ambient Illumination | Ambient Temperature | Ambient Humidity | Weight (with packaging / unit only) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BWP20-08 (NPN) | Through-beam | 0.1 to 5m | 20mm | 8 | 140mm | Max. 6ms (Frequency B selection is max. 7ms) | 12-24VDC 10% (ripple P-P: max. 10%) | Emitter: max. 80mA, Receiver: max. 80mA | Infrared LED (850nm modulated) | Light ON/Dark ON by switch | NPN open collector output (Load voltage: Max. 30VDC, Load current: Max. 150mA, Residual voltage - NPN: Max. 1VDC) | Reverse power polarity, output short over current protection circuit | Over 20M (at 500VDC megger) | Synchronized by synchronous line | Interference protection by transmission frequency selection | 240V the square wave noise (pulse width: 1) by the noise simulation | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Ambient light: max. 10,000 (received light side illumination) | -10 to 55, storage: -20 to 60 | 35 to 85%RH, storage: 35 to 85%RH | Approx. 480g (approx. 280g) |
| BWP20-12 (NPN) | 12 | 220mm | Approx. 520g (approx. 320g) | ||||||||||||||||||||
| BWP20-16 (NPN) | 16 | 300mm | Approx. 620g (approx. 360g) | ||||||||||||||||||||
| BWP20-20 (NPN) | 20 | 380mm | Approx. 680g (approx. 430g) | ||||||||||||||||||||
| BWP20-08P (PNP) | Through-beam | 0.1 to 5m | 20mm | 8 | 140mm | Max. 6ms (Frequency B selection is max. 7ms) | NPN or PNP open collector output (Load voltage: Max. 30VDC, Load current: Max. 150mA, Residual voltage - PNP: Max. 2.5VDC) | Approx. 480g (approx. 280g) | |||||||||||||||
| BWP20-12P (PNP) | 12 | 220mm | Approx. 520g (approx. 320g) | ||||||||||||||||||||
| BWP20-16P (PNP) | Through-beam | 0.1 to 5m | 20mm | 16 | 300mm | Max. 6ms (Frequency B selection is max. 7ms) | NPN or PNP open collector output (Load voltage: Max. 30VDC, Load current: Max. 150mA, Residual voltage - PNP: Max. 2.5VDC) | Approx. 620g (approx. 360g) | |||||||||||||||
| BWP20-20P (PNP) | 20 | 380mm | Approx. 680g (approx. 430g) |
Note: 1: The weight includes packaging. The weight in parenthesis is for unit only. The temperature or humidity mentioned in Environment indicates a non freezing or condensation. Please read Safety Considerations in the instruction manual before using.
2411220436_Autonics-BWP20-20_C17544073.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
