<
>
Specifications
Operating Temperature:
-10℃~+55℃
Voltage - Supply:
12V~24V
Mfr. Part #:
BWP20-16
Key Attributes
Model Number:
BWP20-16
Product Description
Product Overview
The BWP Series Flat Area Sensor offers a compact and efficient solution for detecting opaque objects. Featuring a 13mm slim body with a Fresnel lens and a durable plastic (PC/ABS) injection case, this sensor is designed for easy recognition from side, front, and long distances due to its high-brightness LED. It provides various functions including stop transmission, interference prevention, and selectable Light ON/Dark ON operation modes. With a fast response time of up to 7ms and available in four models with varying optical axis pitches and sensing heights, the BWP Series is suitable for applications requiring precise and reliable detection. Its IP40 protection structure ensures durability in industrial environments.
Product Attributes
- Brand: Not explicitly stated, but part of D-51 SENSORS CONTROLLERS MOTION DEVICES SOFTWARE category.
- Case Material: Polycarbonate/Acrylonitrile butadiene styrene (PC/ABS)
- Sensing Part Material: Polymethyl methacrylate
- Protection Structure: IP40 (IEC standard)
- Cable: 3.5mm, 4-wire, 3m (AWG 24, core diameter: 0.08mm, number of cores: 40, insulator out diameter: 1mm)
- Approvals: Not specified.
Technical Specifications
| Model | Sensing Type | Sensing Distance | Optical Axis Pitch | Number of Optical Axis | Sensing Height | Response Time | Power Supply | Current Consumption (Emitter/Receiver) | Light Source | Operation Mode | Control Output | Protection Circuit | Insulation Resistance | Synchronization Type | Interference Protection | Noise Immunity | Dielectric Strength | Vibration | Shock | Ambient Illumination | Ambient Temperature | Ambient Humidity | Weight (Unit Only) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BWP20-08 / BWP20-08P | Through-beam | 0.1 to 5m | 20mm | 8 | 140mm | Max. 6ms (Frequency B selection is max. 7ms) | 12-24VDC 10% (ripple P-P: max. 10%) | Max. 80mA / Max. 80mA | Infrared LED (850nm modulated) | Light ON/Dark ON by switch | NPN or PNP open collector output (Max. 30VDC, Max. 150mA) | Reverse power polarity, output short over current protection circuit | Over 20M (at 500VDC megger) | Synchronized by synchronous line | Interference protection by transmission frequency selection | 240V the square wave noise (pulse width: 1s) by the noise simulation | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Max. 10,000 lx | -10 to 55 (Storage: -20 to 60) | 35 to 85%RH (Storage: 35 to 85%RH) | Approx. 280g |
| BWP20-12 / BWP20-12P | Through-beam | 0.1 to 5m | 20mm | 12 | 220mm | Max. 6ms (Frequency B selection is max. 7ms) | 12-24VDC 10% (ripple P-P: max. 10%) | Max. 80mA / Max. 80mA | Infrared LED (850nm modulated) | Light ON/Dark ON by switch | NPN or PNP open collector output (Max. 30VDC, Max. 150mA) | Reverse power polarity, output short over current protection circuit | Over 20M (at 500VDC megger) | Synchronized by synchronous line | Interference protection by transmission frequency selection | 240V the square wave noise (pulse width: 1s) by the noise simulation | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Max. 10,000 lx | -10 to 55 (Storage: -20 to 60) | 35 to 85%RH (Storage: 35 to 85%RH) | Approx. 320g |
| BWP20-16 / BWP20-16P | Through-beam | 0.1 to 5m | 20mm | 16 | 300mm | Max. 6ms (Frequency B selection is max. 7ms) | 12-24VDC 10% (ripple P-P: max. 10%) | Max. 80mA / Max. 80mA | Infrared LED (850nm modulated) | Light ON/Dark ON by switch | NPN or PNP open collector output (Max. 30VDC, Max. 150mA) | Reverse power polarity, output short over current protection circuit | Over 20M (at 500VDC megger) | Synchronized by synchronous line | Interference protection by transmission frequency selection | 240V the square wave noise (pulse width: 1s) by the noise simulation | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Max. 10,000 lx | -10 to 55 (Storage: -20 to 60) | 35 to 85%RH (Storage: 35 to 85%RH) | Approx. 360g |
| BWP20-20 / BWP20-20P | Through-beam | 0.1 to 5m | 20mm | 20 | 380mm | Max. 6ms (Frequency B selection is max. 7ms) | 12-24VDC 10% (ripple P-P: max. 10%) | Max. 80mA / Max. 80mA | Infrared LED (850nm modulated) | Light ON/Dark ON by switch | NPN or PNP open collector output (Max. 30VDC, Max. 150mA) | Reverse power polarity, output short over current protection circuit | Over 20M (at 500VDC megger) | Synchronized by synchronous line | Interference protection by transmission frequency selection | 240V the square wave noise (pulse width: 1s) by the noise simulation | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude or 300m/s at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Max. 10,000 lx | -10 to 55 (Storage: -20 to 60) | 35 to 85%RH (Storage: 35 to 85%RH) | Approx. 430g |
2411220436_Autonics-BWP20-16_C17502756.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
