<
>
Specifications
Mfr. Part #:
BW40-08P
Key Attributes
Model Number:
BW40-08P
Product Description
Product Overview
The D-44 BW Series Area Sensor is a through-beam type photoelectric sensor designed for long-distance detection up to 7 meters. It offers a wide range of configurations with 22 product types, featuring optical axis pitches of 20mm or 40mm and sensing heights from 120mm to 940mm. The 20mm optical axis pitch (BW20-) minimizes unsensing areas, while high-brightness LEDs on both the emitter and receiver ensure easy recognition from various angles and distances. This sensor includes essential functions such as self-diagnosis, mutual interference prevention, and external diagnosis, and boasts an IP65 protection structure for robust environmental resistance.
Product Attributes
- Brand: Autonics
- Protection Structure: IP65 (IEC standard)
- Case Material: Aluminum
- Front Cover/Sensing Part Material: Acrylic
- Light Source: Infrared LED (850nm modulated)
- Approvals:
Technical Specifications
| Model | Sensing Method | Sensing Distance | Min. Sensing Target | Optical Axis Pitch | Number of Optical Axis | Sensing Height | Response Time | Power Supply | Current Consumption | Operation Mode | Control Output | Protection Circuit | Insulation Resistance | Synchronization Type | Self-Diagnosis | Interference Protection | Noise Immunity | Dielectric Strength | Vibration | Shock | Ambient Illumination | Ambient Temperature | Ambient Humidity | Cable | Accessory | Weight (Unit Only) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| BW20- (P) | Through-beam type | 0.1 to 7m | Opaque material of min. 30mm | 20mm | 8 to 48 | 140 to 940mm | Max. 10ms | 12-24VDC 10% (ripple P-P: max. 10%) | Emitter: max. 120mA, Receiver: max. 120mA | Light ON fixed | NPN or PNP open collector output (Load voltage: max. 30VDC, Load current: max. 100mA, Residual voltage - NPN: max. 1VDC, PNP: max. 2.5VDC) | Reverse polarity protection circuit, output short over current protection circuit | Over 20M (at 500VDC megger) | Timing method by synchronous line | Emitter/Receiver monitoring, direct light monitoring, over current monitoring | Interference protection by master/slave function | 240V the square wave noise (pulse width 1) by the noise simulator | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Max. 100,000lx (receiver illumination) | -10 to 55, storage: -20 to 60 | 35 to 85%RH, storage: 35 to 85%RH | 5mm, 4-wire, 300mm, M12 connector | Bracket A: 4, Bracket B: 4, Bolt : 8 | Approx. 1.4kg | |
| BW40- (P) | Through-beam type | 0.1 to 7m | Opaque material of min. 50mm | 40mm | 4 to 24 | 120 to 920mm | Max. 10ms | 12-24VDC 10% (ripple P-P: max. 10%) | Emitter: max. 120mA, Receiver: max. 120mA | Light ON fixed | NPN or PNP open collector output (Load voltage: max. 30VDC, Load current: max. 100mA, Residual voltage - NPN: max. 1VDC, PNP: max. 2.5VDC) | Reverse polarity protection circuit, output short over current protection circuit | Over 20M (at 500VDC megger) | Timing method by synchronous line | Emitter/Receiver monitoring, direct light monitoring, over current monitoring | Interference protection by master/slave function | 240V the square wave noise (pulse width 1) by the noise simulator | 1,000VAC 50/60Hz for 1 min | 1.5mm amplitude at frequency of 10 to 55Hz (for 1 min) in each X, Y, Z direction for 2 hours | 500m/s (approx. 50G) in each X, Y, Z direction for 3 times | Max. 100,000lx (receiver illumination) | -10 to 55, storage: -20 to 60 | 35 to 85%RH, storage: 35 to 85%RH | 5mm, 4-wire, 300mm, M12 connector | Bracket A: 4, Bracket B: 4, Bolt : 8 | Approx. 1.4kg | |
| BW20-48 | Approx. 2.1kg (Approx. 1.4kg) | ||||||||||||||||||||||||||
| BW40-24 | Approx. 2.1kg (Approx. 1.4kg) | ||||||||||||||||||||||||||
| Model | Number of optical axis | Sensing height | Optical axis pitch |
|---|---|---|---|
| BW20-08(P) | 8 | 140mm | 20mm |
| BW40-04(P) | 4 | 120mm | 40mm |
| BW20-12(P) | 12 | 220mm | 20mm |
| BW40-06(P) | 6 | 200mm | 40mm |
| BW20-16(P) | 16 | 300mm | 20mm |
| BW40-08(P) | 8 | 280mm | 40mm |
| BW20-20(P) | 20 | 380mm | 20mm |
| BW40-10(P) | 10 | 360mm | 40mm |
| BW20-24(P) | 24 | 460mm | 20mm |
| BW40-12(P) | 12 | 440mm | 40mm |
| BW20-28(P) | 28 | 540mm | 20mm |
| BW40-14(P) | 14 | 520mm | 40mm |
| BW20-32(P) | 32 | 620mm | 20mm |
| BW40-16(P) | 16 | 600mm | 40mm |
| BW20-36(P) | 36 | 700mm | 20mm |
| BW40-18(P) | 18 | 680mm | 40mm |
| BW20-40(P) | 40 | 780mm | 20mm |
| BW40-20(P) | 20 | 760mm | 40mm |
| BW20-44(P) | 44 | 860mm | 20mm |
| BW40-22(P) | 22 | 840mm | 40mm |
| BW20-48(P) | 48 | 940mm | 20mm |
| BW40-24(P) | 24 | 920mm | 40mm |
| Item | Description |
|---|---|
| Optical axis pitch | 20mm, 40mm |
| Number of optical axis | 04 to 48 |
| Control output | No mark: NPN open collector output P: PNP open collector output |
| Model | L (mm) | A, B (mm) |
|---|---|---|
| BW20-08(P) | 160 | 20 |
| BW40-04(P) | 160 | 40 |
| BW20-12(P) | 240 | 20 |
| BW40-06(P) | 240 | 40 |
| BW20-16(P) | 320 | 20 |
| BW40-08(P) | 320 | 40 |
| BW20-20(P) | 400 | 20 |
| BW40-10(P) | 400 | 40 |
| BW20-24(P) | 480 | 20 |
| BW40-12(P) | 480 | 40 |
| BW20-28(P) | 560 | 20 |
| BW40-14(P) | 560 | 40 |
| BW20-32(P) | 640 | 20 |
| BW40-16(P) | 640 | 40 |
| BW20-36(P) | 720 | 20 |
| BW40-18(P) | 720 | 40 |
| BW20-40(P) | 800 | 20 |
| BW40-20(P) | 800 | 40 |
| BW20-44(P) | 880 | 20 |
| BW40-22(P) | 880 | 40 |
| BW20-48(P) | 960 | 20 |
| BW40-24(P) | 960 | 40 |
| Indicator | Color | Status |
|---|---|---|
| POWER | Green | Stable light ON |
| TEST (M/S) | Yellow | Unstable |
| (Error) | Red | Stable light OFF |
| Pin No. | Cable color (Emitter) | Emitter Function | Cable color (Receiver) | Receiver Function |
|---|---|---|---|---|
| 1 | Brown | 12-24VDC | Brown | 12-24VDC |
| 2 | White | SYNC | White | SYNC |
| 3 | Blue | 0V | Blue | 0V |
| 4 | Black | TEST (M/S) | Black | OUT |
| Type | Model | Cable length (L) | Color |
|---|---|---|---|
| Emitter | CID4-3T | 3m | Black |
| CID4-5T | 5m | Gray | |
| CID4-7T | 7m | Red | |
| CID4-10T | 10m | Green | |
| CID4-15T | 15m | Yellow | |
| Receiver | CID4-3R | 3m | Black |
| CID4-5R | 5m | Gray | |
| CID4-7R | 7m | Red | |
| CID4-10R | 10m | Green | |
| CID4-15R | 15m | Yellow |
| Diagnosis Item | Emitter | Receiver |
|---|---|---|
| Emitter failure (time out) | ||
| Malfunction of MASTER/SLAVE line | (operation in MASTER) | |
| Damage in light receiver | ||
| Control output over current | ||
| Malfunction, disconnection, or circuit break of synchronous line | ||
| Damage in light emitter | ||
| Emitter failure (time out) |
| Troubleshooting Cause | Troubleshooting |
|---|---|
| Not operating | Power supply: Supply the rated power. Incorrect cable connection or disconnection: Check the wiring. Rated connection failure: Use it within rated sensing distance. |
| Not operating sometimes | Pollution by dirt of sensor cover: Remove dirt by soft brush or cloth. Connector connection failure: Check the assembled part of the connector. |
| Control output is OFF even though there is no target object. | Out of rated sensing distance: Use within the rated sensing distance. There is an obstacle to cut off the light emitted between emitter and receiver: Remove the obstacle. There is a strong electric wave or noise generated by motor, electric generator, high voltage line etc.: Put away the strong electric wave or noise generator. |
| LED displays for break of light emitting element | Break of light emitting element |
| LED displays for failure of emitter | Break of light emitting circuit |
| LED displays for failure of receiver | Break of light emitting receiving element |
| LED displays for synchronous line | Synchronous line incorrect connection or disconnection: Check the wiring. Break of synchronous circuit of emitter or receiver: Contact Autonics Corp. |
| LED displays for control output over current | Control output line is shorten: Check the wiring. Over load: Check the rated load capacity. |
| LED displays for emitter malfunction | Emitter malfunction: Treat after checking the emitter display LED. |
| Sensing distance (L) | Installation allowable distance (D) |
|---|---|
| 0.1 to 3m | Min. 0.4m |
| 3m | Ltan8=min. L0.14 |
There can be a little different based on installation environment.
Avoid using the unit in the place where the sensor is exposed directly to the fluorescent light with high speed start or high frequency.
2411220420_Autonics-BW40-08P_C17241197.pdf
Request A Quote
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
