Online Service

Online Service

Contact Person
+86 136 6733 2386
quality Refrigerant concentration sensor Aosong ACD4100 with oxygen independent NDIR technology and digital interface output factory
<
quality Refrigerant concentration sensor Aosong ACD4100 with oxygen independent NDIR technology and digital interface output factory
>
Specifications
Measurement Range:
0ppm~36000ppm
Voltage - Supply:
4.75V~5.25V
Operating Temperature:
-30℃~+60℃
Interface:
I2C;UART
Mfr. Part #:
ACD4100
Package:
Through Hole
Key Attributes
Model Number: ACD4100
Product Description

Product Overview

The ACD4100 is an optical refrigerant sensor designed for detecting refrigerant concentration in the air using Non-Dispersive Infrared (NDIR) technology. It offers excellent long-term stability, superior selectivity, and is oxygen-independent. The sensor integrates infrared gas detection technology, precise optical path design, and high-accuracy signal detection circuits to ensure accurate and reliable measurements. It features a fast response and recovery time, strong anti-interference capabilities, and provides a standard digital interface output for convenient data reading and interaction. The ACD4100 is widely applicable in large industrial refrigeration equipment, commercial refrigeration facilities like supermarkets and cold storage, and environmental monitoring stations for refrigerant leak detection.

Product Attributes

  • Brand: ASAIR
  • Origin: Guangzhou Aosong Electronics Co., Ltd.
  • Sensor Type: Optical Refrigerant Sensor
  • Technology: Non-Dispersive Infrared (NDIR)
  • Default Calibration Mode: Automatic Calibration
  • Communication Interfaces: I2C, UART
  • Output Signal: Digital (I2C/UART), Alarm Switch Output
  • Warranty: 12 months

Technical Specifications

Parameter Description
Working Voltage 4.755.25V
Working Current Average current <45mA
Typical Power 100mW @5V
Measurement Range 0~25% LFL (0~36000ppm)
Accuracy 2.5% LFL
Preheating Time 120s
Operating Conditions -3060; 095% RH (non-condensing)
Storage Conditions -3060; 095% RH (non-condensing)
Data Refresh Frequency 2s
Service Life >15 years
Alarm Threshold 3.5% LFL (5000ppm)
T63 Response Time <20s (at 25, 50% RH, 1013mBar)
Dimensions Refer to Figure 4 (Unit: mm, Tolerance 0.5mm)
Pin Definitions
  • Pin 1: SDA/RX (Sensor Receive)
  • Pin 2: SCL/TX (Sensor Transmit)
  • Pin 3: GND (Ground)
  • Pin 4: VCC (Power)
  • Pin 5: SET (Communication Mode Setting)
  • Pin 6: Dout (Alarm Switch Output)
I2C Communication Speed Max 100kHz
UART Baud Rate 1200 bps
UART Data Format 8 data bits, no parity, 1 stop bit

2504101957_Aosong-ACD4100_C45354804.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max