Product Overview
The Piher HRPM Hall-Effect Rotary Position Sensor offers 360-degree absolute position feedback with endless mechanical rotational angles and no dead band. It maintains position on power loss and features configurable electrical angles from 50 to 360 degrees. Designed for harsh environments, this cost-effective, non-contacting sensor utilizes a touchless concept with separate housings for electronics and a magnet, significantly increasing reliability and lifetime by eliminating wear and tear. Its fully sealed and flanged-mounted design allows for easy positioning and versatility, with options for bare or housed magnets, different pin-outs, and support for low and high-voltage power supplies. Applications span industrial automation, robotics, transportation, marine, and home/building automation.
Product Attributes
- Brand: Piher
- Sensor Type: Hall-Effect Rotary Position Sensor
- Connector: Integrated AMP Superseal
- Design: Two-piece design (separate magnet)
- Operation: Touchless, non-contacting
- Mechanical Life: Virtually unlimited
- Environmental Protection: Sealed, IP69K rating
- Origin: Spain (implied by contact information)
Technical Specifications
| Specification | Value |
|---|---|
| Electrical Specifications | |
| Supply Voltage (05) | 5V 10% |
| Supply Voltage (RE) | 7V to 32V |
| Supply Current (05) | 12 mA |
| Supply Current (RE) | 14 mA |
| Overvoltage Protection | +10V to +36V |
| Reverse Voltage Protection | -10V to -36V |
| Output Standard (CW) | 10% to 90% Vdc |
| Output Standard (CCW) | 90% to 10% Vdc |
| Linearity | 1% (Note: Ferromagnetic materials near sensor may affect linearity) |
| Resolution | Up to 12 bit |
| Self-diagnostic Features | Yes |
| Mechanical Specifications | |
| Rotational Life | Virtually unlimited |
| Mechanical Range | 360 (endless rotation) |
| Mating Connector | AMP Superseal 282087-1 |
| Air Gap | 3mm 1mm |
| Mounting Screw Sizes (Sensor to mounting surface) | Non-magnetic, stainless steel M4 X 0.7 screws and 8 mm OD washers |
| Mounting Screw Sizes (Housed magnet to actuator mounting shaft) | Non-magnetic, stainless steel M3 X 0.5 plain cup point set screws |
| Environmental Specifications | |
| Operating Temperature | -40 to +125C |
| Shock Rating | 50g |
| Vibration Rating | 5-2000 Hz; 20g; Amax 0,75 mm |
| Sealing | IP69K |
| How to Order (Example Structure) | HRPM - [Electric Angle] - [Voltage Supply] - [Actuator Series] - [Pinout] |
| Electric Rotational Angle Options | 050, 060, 070, 090, 120, 180, 270, 350, 360 |
| Voltage Supply Options | 05 (5V 10%), RE (7V-30V) |
| Actuator Series Options | M (Bare magnet), A (Housed magnet) |
| Pinout Options | E (European), A (American) |
| Connection Scheme | |
| Pin 1 | European: Ground | American: Power supply |
| Pin 2 | European: Power Supply | American: Ground |
| Pin 3 | European: Signal output | American: Signal output |
| Output Functions | |
| Standard | 360 degrees, inverted standard (CW) |
| Custom | Custom output functions on request |
2411192338_Amphenol-HRPM-A-090S-05-E_C20274762.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
