Product Overview
The Wilcoxon HV100LF and HV200LF series are low-frequency accelerometers designed for applications requiring high electrical isolation and improved EMI resistance. These sensors are ideal for power generation, wind turbines, railway systems, and other high-voltage generator environments. They offer ultra low-frequency measurements down to 0.1 Hz, rapid shock recovery, and can withstand arcing between the sensor base and internal electronics up to 6,000 volts. Improvements in EFT and ESD resistance enhance survivability during extreme transient events.
Product Attributes
- Brand: Wilcoxon Sensing Technologies
- Company: An Amphenol Company
- Certifications: Manufactured in an approved ISO 9001 facility
- Sensing Element Design: PZT, shear
- Sensor Case Material: Stainless steel
- Isolation Material: Ceramic
- Sealing: Hermetic
- Grounding: Case isolated, internally shielded
- Recommended Cabling: J10 / J9T2A
Technical Specifications
| Specification | LF series (100 mV/g) | LF-500 series (500 mV/g) |
|---|---|---|
| Sensitivity, 5%, 25C | 100 mV/g | 500 mV/g |
| Acceleration range, VDC > 22 V | 80 g peak | 10 g peak |
| Amplitude nonlinearity | 1% | |
| Frequency response: 5% | 0.35 - 5,000 Hz | |
| Frequency response: 10% | 0.25 - 7,000 Hz | |
| Frequency response: 3 dB | 0.1 - 11,000 Hz | |
| Resonance frequency, nominal | 28 kHz | |
| Transverse sensitivity, max | 5% of axial | |
| Temperature response: 25C to +120C | 10% | +15% |
| Temperature range | 50 to +120 C | |
| Power requirement: Voltage source | 18 - 30 VDC | |
| Power requirement: Current regulating diode | 2 - 10 mA | |
| Dielectric withstand voltage between connector and surface: 6,000 VDC (1 min.) | 6,000 VDC | |
| Dielectric withstand voltage between connector and surface: 5,000 VAC (1 min.) | 5,000 VAC | |
| Electrical noise, equiv. g: Broadband 2.5 Hz to 25 kHz | 400 g rms | 250 g rms |
| Electrical noise, equiv. g: Spectral 10 Hz | 10 g/Hz | 3 g/Hz |
| Electrical noise, equiv. g: Spectral 100 Hz | 5 g/Hz | 2 g/Hz |
| Electrical noise, equiv. g: Spectral 1,000 Hz | 5 g/Hz | 2 g/Hz |
| Output impedance, max | 100 | 300 |
| Impedance, between connector and base: DC | >100 G | |
| Impedance, between connector and base: 100 Hz | >100 M | |
| Impedance, between connector and base: 1.0 kHz | >10 M | |
| Impedance, between connector and base: 10 kHz | >1 M | |
| Bias output voltage | 13 VDC | |
| Vibration limit | 500 g peak | |
| Shock limit | 5,000 g peak | |
| Electromagnetic sensitivity, equiv. g, max | 70 g/gauss | |
| Base strain sensitivity, max | 0.0002 g/strain | |
HV100LF Series Models
| Model | Output Connector | Integral Mounting | Dimensions (A x B x C) | Weight |
|---|---|---|---|---|
| HV100LF / HV100LF-500 | 4 pin, M12 | M8 x 1.25 | 1.98 in. (50.3 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm) | 126 grams (4.44 oz) |
| HV101LF / HV101LF-500 | 4 pin, M12 | 1/4-28 UNF | 1.98 in. (50.3 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm) | 126 grams (4.44 oz) |
| HV102LF / HV102LF-500 | 4 pin, M12 | M6 x 1.00 | 1.98 in. (50.3 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm) | 126 grams (4.44 oz) |
HV200LF Series Models
| Model | Output Connector | Integral Mounting | Dimensions (A x B x C) | Weight |
|---|---|---|---|---|
| HV200LF / HV200LF-500 | 2 pin, MIL-5015 | 1/4-28 UNF | 2.21 in. (56.0 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm) | 122 grams (4.35 oz) |
| HV201LF / HV201LF-500 | 2 pin, MIL-5015 | M8 x 1.25 | 2.21 in. (56.0 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm) | 122 grams (4.35 oz) |
| HV202LF / HV202LF-500 | 2 pin, MIL-5015 | M6 x 1.00 | 2.21 in. (56.0 mm) x 0.33 in. (8.4 mm) x 1.21 in. (30.8 mm) | 122 grams (4.35 oz) |
Connections - HV100LF Series
| Function | Connector Pin | Signal |
|---|---|---|
| Inner shield | P1 | to pin 3 |
| Common | P2 | common |
| Case | P3 | case |
| Connector shell case | P4 | case |
Connections - HV200LF Series
| Function | Connector Pin | Signal |
|---|---|---|
| Common | A | common |
| Connector shell case | B | case |
2504101957_Amphenol-HV200LF_C1019409.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible