Online Service

Online Service

Contact Person
+86 136 6733 2386
quality High Precision Ethylene Oxide Sensor Amphenol SGX-7ETO with Typical Baseline Range and Gas Monitoring factory
<
quality High Precision Ethylene Oxide Sensor Amphenol SGX-7ETO with Typical Baseline Range and Gas Monitoring factory
>
Specifications
Measurement Range:
800mbar~1200mbar
Operating Temperature:
-20℃~+50℃
Mfr. Part #:
SGX-7ETO
Key Attributes
Model Number: SGX-7ETO
Product Description

Product Overview

The SGX-7ETO is an industrial Ethylene Oxide (ETO) sensor designed for reliable gas detection. It offers a measurement range of 0-20 ppm with a T90 response time of less than 120 seconds. The sensor features a typical baseline range of 0 to +2 ppm ETO equivalent and a long-term output drift of less than 20% per annum. With an expected operating life of over 24 months in air and intrinsic safety data, it is suitable for various industrial applications where accurate ETO monitoring is critical.

Product Attributes

  • Brand: SGX Sensortech
  • Model: SGX-7ETO
  • Compliance: RoHS compliant

Technical Specifications

Specification Value
Measurement Range 0 - 20 ppm
T90 Response Time < 120 seconds
Typical Baseline Range (pure air) 0 to +2 ppm ETO equivalent
Long Term Output Drift < 20% per annum
Expected Operating Life > 24 months in air
Output Signal 2500 700 nA / ppm
Recommended Load Resistor 10 ohms
Bias Voltage +300 mV
Maximum Overload 100 ppm
Repeatability < 2% ETO equivalent
Resolution (Electronics dependent) 0.1 ppm typical
Operating Temperature Range -20C to +50C
Pressure Range 800 to 1200 mbar
Operating Humidity Range 15% to 90% RH
Recommended Storage Temperature 0C to 20C
Maximum (at 2000 ppm) 0.3 mA
Maximum o/c Voltage 1.3 V
Maximum s/c Current <1.0 A

Important Notes

All performance specifications are based upon the following environmental conditions: 20C, 50% relative humidity, 101kPa. Cross Sensitivity Data is for information only. Calibration is recommended with target gas as the accuracy of calibration and measurement cannot be ensured. The cross sensitivities may fluctuate between 30% and may differ from batch to batch or across sensors life time. It is important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into instrument and operation. By the nature of the technology used, any electrochemical gas sensor offered by SGX Europe Sp. z o.o. can potentially fail to meet specification without warning. For life safety applications, we recommend that all sensors and instruments using these sensors are checked for response to gas before use.


2411261432_Amphenol-SGX-7ETO_C3659408.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max