Product Overview
The Piher HCSP-1BS family of open-loop current sensors utilizes Hall effect technology to provide a ratiometric analog output voltage signal proportional to the measured AC and DC current. Designed for busbar mounting, these sensors offer non-intrusive measurement with galvanic separation between power and control circuits. They are ideal for accurate current measurement in automotive battery management and motor control applications, including EV motor inverters and DC/DC converters. The HCSP-1BS series supports a wide current measuring range from 200 A to 1.500 A and operates reliably within an extended temperature range of -40C to +125C.
Product Attributes
- Brand: Piher Sensing Systems
- Technology: Hall Effect
- Mounting Type: Busbar Mounting
- Output Type: Simple Analog Ratiometric
- Separation: Galvanic separation between power and control
- Origin: Spain (implied by contact information)
Technical Specifications
| Parameter | Unit | Min. | Typ. | Max. | Notes |
|---|---|---|---|---|---|
| Supply voltage | V | 4,5 | 5 | 5,5 | |
| Supply current | mA | 9 | 12 | 14 | |
| Output voltage | V | 0,5 | 4,5 | ||
| Offset voltage | V | 2,5 | |||
| Response time | sec | 3 | |||
| Frequency bandwidth | kHz | 70 | 250 | ||
| Operating temperature | C | -40 | +125 | ||
| Typical error (at 25C; Vcc = 5V) | % | 0,65 | 2,5 | ||
| Max. error (at -40C to +125C; Vcc= 5V) | % | 1 | 3,5 | ||
| Current measuring range | A | 200 | 1.500 | Various models available (e.g., 200 A to 1500 A) | |
| Current nominal value | A | (Nominal value depends on model) | e.g., 200 A, 300 A, ... 1500 A | ||
| Sensitivity* | mV/A | (Varies by model) | e.g., 10 mV/A (for 200 A), 2 mV/A (for 1000 A) | ||
| Sensitivity error* | % | 0,6 | |||
| Electrical offset voltage* | mV | 3 |
*at 25C / Vcc = 5V; Other specifications on request.
Dimensions: See diagram on page 2 of 3. Key dimensions include 20.50 mm length, 6.00 mm width, and 14.5 mm height. M4 Nut cavity deep 4mm.
Connections: 1 Signal output, 2 Ground, 3 Supply voltage, 4 n/c. Mating connector: TYCO 1473672-1. Mounting recommendation: M4 screw, Spring washer, M4 nut (acc. to ISO 4032), Max Torque: 2Nm.
Order Code Example: HCSP-1BS-0300 (for 300 A range)
Available Models: HCSP-1BS-0200 to HCSP-1BS-1500.
Applications: Battery management, Motor control, EV motor inverters, DC/DC converters.
2411272145_Amphenol-HCSP-1BS-0900_C17621192.pdf
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible
