Bromine Sensor SGX-BR2-5

Product Overview

The SGX Bromine Sensor SGX-BR2-5 utilizes a revolutionary innovation in electrochemical sensing technology to accurately detect and measure bromine gas concentrations. It operates by detecting output signals from electrochemical reactions at three catalytic electrodes, a liquid electrolyte, and gas diffusion holes. Gas enters through diffusion holes to the working electrode where a reaction occurs at the 3-phase boundary, generating a current signal linearly proportional to gas concentration. This sensor is designed for applications requiring high sensitivity, accuracy, and reliability in gas measurement equipment, environmental air monitoring, leak detection, emissions monitoring, TLV-monitoring, and in portable and fixed-point applications within the water treatment, chemical industry, and swimming pool sectors.

Product Attributes

• Brand: SGX
• Model: SGX-BR2-5
• Electrolyte Type: Water based
• Housing Material: PPO

Technical Specifications

Key Applications

• Gas measurement equipment
• Environmental air monitoring
• Leak detection
• Emissions
• TLV-monitoring
• Portable and Fixed Point Applications
• Water Treatment, Plants, Swimming, Pools, Chemical Industry

Features

• Small size
• Water based electrolyte
• High selectivity
• High sensitivity
• Excellent sensitivity at low temperatures
• Double sealed housing for advanced leakage protection

Cross Sensitivity

Note: 1) The above interference factors may vary due to different sensors and service life, please refer to the actual test results. 2) This table is not complete for all cross gases, other gas please contact with us.

Important Notes

• All performance is based on conditions at 20C, 50% RH and 1 atm, flow rate>150qcm/min, using SGX recommended circuitry.
• Sensor performance is temperature dependant; please contact SGX for temperature performance other than 20C.
• Do not solder to the connector pins as this may damage the sensor and thereby invalidate the warranty.
• Details on recommended connector pins can be found in the Frequently Asked Questions within the Gas Sensor section of the SGX website.
• Exposure to high concentrations of solvent vapours should be avoided during storage, fitting into instruments, and operation.
• When using sensors on printed circuit boards (PCBs), degreasing agents should be used prior to the sensor being fitted.
• For life safety performance requirements, it is recommended that all sensors and instruments using these sensors are checked for response to gas before use.

Disclaimer

SGX Europe Sp. z o.o. reserves the right to change design features and specifications without prior notification. We do not accept any legal responsibility for customer applications of our sensors. SGX Europe Sp. z o.o. accepts no liability for any consequential losses, injury or damage resulting from the use of this document, the information contained within or from any omissions or errors herein. This document does not constitute an offer for sale and the data contained is for guidance only and may not be taken as warranty. Any use of the given data must be assessed and determined by the user thereof to be in accordance with federal, state and local laws and regulations. All specifications outlined are subject to change without notice.