Online Service

Online Service

Contact Person
+86 136 6733 2386
quality True Power On State Hall Effect Sensor IC ALLEGRO ATS128LSETN-T for Speed and Position Detection factory
<
quality True Power On State Hall Effect Sensor IC ALLEGRO ATS128LSETN-T for Speed and Position Detection factory
>
Specifications
Operating Current:
5.5mA
Operating Temperature:
-40℃~+150℃
Voltage - Supply:
3V~24V
Mfr. Part #:
ATS128LSETN-T
Package:
SIP-4
Key Attributes
Model Number: ATS128LSETN-T
Product Description

Product Overview

The ATS128LSE is a programmable, true power-on state (TPOS) Hall-effect sensor IC designed for gear-tooth and proximity sensing applications. It combines a Hall-effect IC with a rare-earth pellet to detect magnetic signals from ferromagnetic targets. Key features include a wide programmable magnetic operate point (BOP) with fixed hysteresis, user-programmable output polarity and fall time, on-board voltage regulation, and internal protection against supply transients, output short-circuits, and reverse battery conditions. Its advanced dynamic offset cancellation technique ensures stable switch points over temperature and reduces residual offset voltage. This device is ideal for gathering speed or position information and is supplied in a 4-pin SIP package.

Product Attributes

  • Brand: Allegro MicroSystems
  • Package: 4-pin SIP
  • Lead Free: Yes
  • Lead Plating: 100% matte tin

Technical Specifications

CharacteristicSymbolTest ConditionsMin.Typ.Max.Unit
Supply VoltageVCC31224V
Supply Current (No Load)ICCNo load on VOUT5.5mA
Power-On TimetPOTA = 25C; CLOAD (PROBE) = 10 pF30s
Output Saturation VoltageVOUT(sat)Output = On, IOUT = 20 mA175400mV
Output Leakage CurrentIOFFVOUT = 24 V; Output = Off10A
Output Current LimitIOUT(lim)Short-Circuit Protection, Output = On3090mA
Output Rise TimetrVCC = 12 V, RPU = 820 , CLOAD = 10 pF2s
Output Fall TimetfFALL = 0, VCC = 12 V, RLOAD = 820 , CLOAD = 10 pF2s
Air Gap Setpoint Drift Over TemperatureAGDriftDevice programmed with air gap of 2.5 mm0.2mm
Programmable Air Gap RangeAGRangeTA = 25C, Minimum code (BOPPOL = 1, BOPSEL = 255)2.5mm
Programmable Air Gap RangeAGRangeTA = 25C, Maximum code (BOPPOL = 0, BOPSEL = 255)1.5mm
Programming ResolutionResAGTA = 25C, device programmed with air gap of 2.5 mm0.05mm
Package Thermal ResistanceRJA1-layer PCB with copper limited to solder pads101C/W
Package Thermal ResistanceRJA1-layer PCB with copper limited to solder pads and 3.57 in.2 (23.03 cm2) of copper area each side77C/W

2411280113_ALLEGRO-ATS128LSETN-T_C2655056.pdf

Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max