Product Overview

The AK9710AEF3A is a compact mid-infrared quantum photo diode crafted from InSb, leveraging AKM's proprietary compound semiconductor technology to operate effectively at room temperature. This device offers high sensitivity, rapid response times, and robust reliability. It features an integrated optical band-pass filter specifically designed for detecting wavelengths of 3.9m, making it ideally suited for Non-Dispersive Infrared (NDIR) gas sensing applications. The AK9710AEF3A provides a signal-to-noise ratio three times higher than conventional thermopiles and requires no bias voltage, simplifying integration into various gas sensor designs for CO2, CH4, CO, and other gases.

Product Attributes

• Brand: AKM
• Material: InSb (Indium Antimonide)
• Package Type: Small surface mount type plastic package

Technical Specifications

Parameter	Symbol	Min.	Typ.	Max.	Unit	Notes
Product Model	AK9710AEF3A
Operating Temperature	Ta	-40		85	C
Storage Temperature	Tstg	-40		85	C	Operation exceeding these ratings may cause permanent damage to device. Do not apply a bias voltage.
Input Voltage	Vin	-10	0	10	V	*1: Do not apply a bias voltage between Dp and Dn. Refer to the recommended external circuits.
Output Current	Ip	0.58	1.16	2.04	nA	*2: Measurement conditions: Blackbody furnace (diameter = 22.2mm, Surface temperature = 500C), Distance = 10cm, Soda glass between sensor and furnace, Measured by 10Hz lock-in amplifier.
Internal Resistance	Ro	75	188		k	*3: Average value at 500nA output.
Center Wavelength (CWL)	CWL	3830	3910	3990	nm	Angle of incidence = 0, Ta = 25C
Full Width at Half Maximum (FWHM)	FWHM	81	90	99	nm	Angle of incidence = 0, Ta = 25C
Package Dimensions					mm	3mm x 3mm
Pin Count						10-pin

2410311222_AKM-AK9710AEF3A_C3678634.pdf